Help Center

Scanners

Scan stations that add, move and remove stock automatically.

What a scanner station is

A scanner is a fixed scanning point you place on your warehouse map — like a real desk or dock where people scan barcodes. Instead of just looking things up, a scanner knows WHERE it is on your floor plan, so scanning can automatically place stock into the nearest aisle or remove it. You place scanners with the “Add scanner” tool and double-click a scanner dot to open it.

Think of it as: the barcode says WHAT the item is; the scanner’s location says WHERE it belongs.

Linking a scanner to an aisle

A scanner works with a specific aisle in one of two ways:

  • By position — if the scanner dot sits inside an aisle (or right on its border) on the map, it’s automatically linked to that aisle.
  • Manually — you can assign a scanner to a specific aisle regardless of where the dot sits.

Whichever it is, the scanner dialog always tells you which aisle it’s working with, and where scans will land (the lowest/ground floor of that aisle).

The three modes: Info, Adding, Leaving

Every scanner opens on Info by default. A row of buttons at the top switches the mode, and a line right below always explains exactly what the next scan will do:

  • Info — read-only. Scan an item to see its details (never changes anything).
  • Adding — brings stock INTO the aisle.
  • Leaving — takes stock OUT of the aisle.

The buttons are colour-coded and clearly labelled so whoever is at the station can’t mix them up.

Info mode

Info is the safe, default mode — it never changes your data. Scan a barcode and you’ll see the item’s name, its total quantity, how many units are on the shelf, and how many (if any) are “loose”. If the barcode doesn’t match anything yet, Info offers to add it as a new item on the spot (and, if the scanner is inside an aisle, places it there for you).

Adding mode (scanner inside an aisle)

When the scanner sits inside an aisle, Adding is about putting items in their place — not changing how many you own. Each scan simply places that item into this aisle (on the ground floor). The item’s total quantity does NOT change; you’re just recording that it physically lives here now.

Use this when you’re putting stock away onto the shelves of that aisle.

Leaving mode & “loose” stock

When the scanner is inside an aisle, Leaving peels units off the shelf one scan at a time. The unit doesn’t disappear from your inventory — it becomes “loose” (unassigned) stock.

Example: an aisle holds 10 balls. Scan 1 ball in Leaving mode → the aisle now shows 9 on the shelf and 1 loose, and your total is still 10. Keep scanning and the on-shelf count keeps dropping. When the last unit leaves, the item is fully unassigned from that aisle.

Inside an aisle you’ll see two little badges on each item: the on-shelf count, and an amber “N loose” badge when some units have left the shelf.

On-shelf vs loose vs total — what they mean

  • Total quantity — everything you own of that item (shown in Inventory Mode as usual; this never silently changes).
  • On shelf — how many units are physically on this aisle right now.
  • Loose — units that have left the aisle but are still in your inventory, waiting to be put away again.

For every item you’ve always had, on-shelf equals the total until you use Leaving — so nothing about your existing items looks different unless you start splitting stock on purpose.

Scanners NOT inside an aisle (receiving / shipping)

A scanner placed out in the open — not inside any aisle — is treated as a general receiving/shipping station (for example, by the loading dock). To keep it crystal clear, its two action buttons are relabelled:

  • Restock — each scan adds 1 to the item’s total quantity (new stock arriving, e.g. off a truck). The new units start as loose so they don’t inflate any shelf.
  • Ship out — each scan removes 1 from the item’s total quantity (stock leaving your inventory). Loose stock is used up first.

Info works the same as everywhere. Move the scanner into an aisle and the buttons change back to Adding / Leaving automatically.

Registering devices to a scanner

Before a device can scan at a station, it registers to that station — this is how you keep a trusted log of who’s scanning where.

  • Owners can register the device they’re on instantly.
  • Team members tap “Request to register”, and the owner approves it.
  • More than one device can be registered to the same station — handy for shift changes where different people use different phones or tablets.

Each registration records the device name, the person, their IP address and device info, so you always have an activity log.

One device, multiple scanners — and switching between them

A single device can hold registrations at several stations at once. On the Scanners page, the “This device” section shows every station with this device’s standing there:

  • Approved — the device may scan at that station.
  • Pending — you’ve requested access and it’s waiting for owner approval. Pending requests stay visible right there (so you always know what you’ve already asked for), and you can cancel one anytime.
  • Not registered — tap “Request access” to ask.

Once approved at more than one station, use the “Use / Current” toggle to pick which scanner this device is operating right now — and switch whenever you move stations. Approvals are independent: getting approved at one station never cancels your access or requests at another.

Using our native iOS/Android apps with physical barcode guns (Bluetooth/USB)? Each attached gun can be registered individually under the host device — owners see the gun’s name on every registration and can approve or revoke each gun on its own.

Approving devices: the Scanners page

Owners get a dedicated Scanners page (in your account menu) that lists every scanner across all your warehouses, the devices registered or waiting for approval on each, and who they belong to. From there you Approve pending requests or Revoke a device at any time. It’s your single place to see and control every scanning device.

Team members with the “Register scanners” permission see the same page in a personal view: their device’s status at each station, their pending requests, and the switch for which scanner their device currently operates.

The 3D view shows the same thing per station: click a scanner lamp to list the devices registered to it at that moment, labelled Android, iPhone or Web with their ids.

Do I need a special barcode scanner?

No. You can scan with your device’s camera. You can also connect a real barcode scanner — Bluetooth or wired (USB) — which simply types the code into the registered device like a keyboard, so it works out of the box. Our native iOS and Android apps with built-in scanning are out now, making this even faster on the floor.

Security & permissions

Scanning is gated for safety. Team members can only scan at a station once their device has been registered AND approved by the owner for that station — an unregistered or still-pending device can’t change anything. Placing scanners and managing registrations requires the “register scanners” permission, and approving devices is owner-only. Every add/leave scan is also undoable.